QUESTION; Why Slant Bars? ANSWER; (1) SLANT BARS SET at approx. 45° force animals to turn their heads when leaving the feeder, thus dropping the feed inside the feeder, not on the ground. (2) SLANT BARS DO NOT rub hair and hide from the top of livestocks’ neck like cables do. (3) SLANT BARS PREVENT the boss cow from disturbing all the animals feeding on one side of the feeder. (4) SLANT BARS DON’T loosen like cables do thus eliminating cattle getting hung in feeder. QUESTION; Why Round Structural Tube and Pipe Construction? ANSWER; (1) ROUND GIVES MORE all directional strength than square tubing or angular steel when equal amounts of steel are used per foot. (2) ROUND OFFERS less chance of livestock bruising. (3) ROUND CAUSES FEWER cuts or ear tearing than angle iron, square tubing, or cable construction. QUESTION; Why 360° Welds Along the Ends of Tubing and Pipe, Even Where You Don’t See It? ANSWER; (1) GREATER STRENGTH than skip welds. (2) PREVENTS MOISTURE from collecting inside hollow components thus reducing inner rust (no inside cancer like your car). QUESTION; Why Use 55,000# High Tensile Strength Tubing with Walls as Heavy as 1/8”? ANSWER: (1) TOW loader. (2) TO WITHSTAND the abuse that can be offered by a herd of cattle. (3) TO BE STRONG enough to be loaded with 10 tons of feed and pulled through rough fields. QUESTION: Why an All Formed Bottom with a Continuous End Weld? ANSWER: (1) NO CRACKS OR CREVICES to trap feed, which will cause rust. (2) LOAD STRENGTH —NO WELDS to crack under 10 ton plus loads. (3) NO 90° CORNERS at the side of feeder floor where cattle can’t reach feed (thus leaving it to rot and cause rust in competitive models). WEIGH THE ANSWERS AND THE PRODUCT BUNK FEEDER IT AND the impact of large round bales dropped in by a farm “How To Feed Cattl Ar. THE ANSWER Gives You Patented Slant Bar Feeder W More Answers, More Steel, More Strength, More Value! zed Bunks 0-15-20 Foot Lengths 1 for Calves or Sheep) 0-15-20 Foot Lengths QUESTION: Why a T Wide Feeder? ANSWER: (1) HANDLES LARGE ROUND Bi 5%-6%* feeder.) (2) CAPACITY TO HOLD the largi Schoessow wagon will handle. QUESTION: Why a 14” Deep Mangi ANSWER; (1) SAVES FEED THE DEEP dollars saved to you. QUESTION: Why 4’ High Side Pam Removable? ANSWER; (1) IN PLACE AND PROPERLY down the loss of fine feed when milk test). (2) VERSATILITY REMOVE 1 large round bales. (3) VERSATILITY ADJUST TH to the manger to prevent feed to tUESTION: Why Wood Side Panel! ANSWER; (1) FEWER HEATING PROBLEM a sunny summer day. (2) LESS FEED FREEZING PRO! tions qualities of wood. >UESTIQN: Why Dip Painted Waf( answe: (1) DEVELOPED in the northwest has tremendous ability to endm tions. (2) WON’T PEEL into layers like plj (3) DIP PAINTING has been prove! the material it will last for yea ASK YOUR DEALER ABOUT REBATES Distributed By CUMMINGS AND BRICKER, INC. 100 Stover Drive Carlisle, PA 17013 (717) 249-6720 PENNS! MILLER C H RINEI PETERMAN CHAMBER
Significant historical Pennsylvania newspapers