V-TWIN FAST FEED TMR MIXER
FEED THE TRUE T.M.R. AND DO IT FAST
Double Mixing and
Unloading Speed
HD 78 Cham -
24,000 Lb
Tensile Strength
Wider Magnet and
Discharge Chute
UHMW Cham Gun
12 Hay Knives 801 l
to Floor (Model 30:
I*£
SUPER CUT HAY TIGER MIXERS
CHROME PLATED KNIVES SPACED 4 IN. APART ALLOW YOU TO
CUT AND MIX HAY FROM SMALL SQUARE OR LARGE SQUARE BALES
- I" Polyclad Plywood Sides Will Not Corrode
-1” Thick Aiigei Flight
- 1/4” Stainless Steel Auger Trough
-4” Thick Polyethylene Wear Tracks
- Stainless Steel Lined Floor
(Some Mixers aie Being Used for 20 Years with the Original Stainless Steel Liner)
- Knnes Spaced 4” Apart You Do Not Need to Process Dry Longstem Hay Before Adding It to
Youi Mixer
- Stainless Steel Pins in the Mixing Cham are 3/4” or 7/8”, Depending on the Size of the Mixer.
- Sizes from 130 to 490 cu. ft.
Mobile Mixer
aulic Door
Access to
• Cap
;er Fuel Tank -
I Gallon
tern Gear Pump
/ers 15 GPM of
to Mixer Motor
7.4 GPM to
:el Motors
• Better Feed Utilization - You May Not Be Able To Empty Your Silos.
• Less Expensive Premixes - You Can Mix Your Own Feed. (This Could
Make Your Feed Salesman Unhappy)
• Less Problems With Twisted Stomachs - You Might Not See Your
Friend The Vet As Often.
• Less Time and Effort Spent Feeding
• Increased Milk Production
• Full-hydraulic operation powered by quiet, efficient,
air-cooled engine.
• Joystick-controlled; independent, hydraulic motor drive on each
wheel eliminates maintenance associated with drive chain,
sprockets and bearings.
Tom Zartman - Co. Representative
booo
Hay Tiger
Stop By To See The Round Bale
Feeder With New Lower Design
See the new
V-t Win Fast Feed
TMR Mixer
on display at
AO PROGRESS DAYS
by Zartman Farms
Feeder Cart
Manufactured by:
I.H. Rissler
Manufacturing, LLC
1-800-436-5623