MARTIN'S FARM SUPPLY
Creencaslle, PA • (7171-597-4283 (Cate)
4 Miles West of 1-81 on Route 16
Dipped & Painted or Hot
HEADLOCKS
' Sl~ " Sf™ “ • 1.5” Sched. 40 - 3 sizes
7av * Auto Down Cow Release
oira~ * 5 Bar - 48 ” Hi S h
• 1.5” Sched. 40 - Spring
* Auto Latches - Latch
n FREESTALLS
=s SLANT BAR
PANELS
L 5 *S • 3 sizes
• 2 3/8 O D (.154 wall) Sched 40 High Carbon Steel Pipe
• 1/4 x 6” Clamps • 1/2 Bolts & Locknuts
• Adjustable Brisket Brackets • Multiple mounting systems
★ ★ NEW!! ★ NEW!! ★ NEW!! ★ ★ ★ DENSILITE ★
★ BRIGHT WHITE PLASTIC PLYWOOD
★ FINALLY!!! A 4’xB’ PANEL THAT HAS ALL THE FEATURES YOU ARE LOOKING FOR:
•Less Expansion! (30% less than most plastics) lll "More Rigidity l (will not wave or buckle) 1 !' • Lifetime UV Protection'"
★ Bright White for Interior Illumination'" 'Several Colors Avalable »Easy Clean Surfaces'" »FDA Approved (for food & milk processing)'"
1/2” x 48" x 96" Heavy Duty Panel, - Uses: For Extreme Impact Areas in Walls, Ceilings, Dividers, Doors, Bench Tops, Enclosures, Parlors,
Milk Rooms, Utility Rooms, Concrete Forms, Signs, Horse Stalls, Kick Boards, Etc
3/4" x 48" x ne "
Ultra Heavy Duty Panel - Uses: Trailer Floors & Liners, Conveyors, Dividers, Work Benches, Walls, Boxes, Etc
★ ALSO SANI-ARMOR ROLL PLASTIC
• 24” - 72” Wide • 1/8” & 1/4” Thick • Length 100’ - 300’ Rolls
Uses: Bunk Liners, Manger Liners, Truck Bed Liners, Manure Spreader Liners, Sawmill Conveyors
We can cut to size: sheets or rolls. We can get U.H.M.W. for Wear Plates and Bearings,
EZ Foot Rubber Flooring T)T TR AIVFfY
• One continuous length up to 500’
• 12” - 88” Wide
• 1/2” Thick
• Top is Textured and Grooved
• No seams or joints
• Easy installation
• Not Belting
• Increases, feed intake
• Improves foot health
• Empire Curtain Systems
Call us for literature, pictures and closest place to see our equipment.
Custom Mfg. Will Solve Today’s Needs and Make Tomorrow
More Profitable ... It Is Our Mainline Not A Sideline
COW MATTRESS
“Give Your Cows the Best...
Put them to bed on a Durabed mattress!”
-dipped Galv. Barn Equip.
Facts About Hot-dipped Galvanizing
• Average coating thickness of 3A-4 mil.
• Zinc solution is 838° in temp, which loosens the
outer layers of steel molecules and mixes the
zinc and steel together
• Product must be vented to allow zinc to coat
inside & out.
• If coating is chipped off you still have a zinc &
steel mixture on surface.
• Life expectancy of 30 plus yrs.
• Coating is put on after fabrication to avoid
brickling from bending & welding
• All weld joints are galv. also
• Comparison - galv. sched 40 water pipe has 1 -
VA mil. thickness of coating
• New 100 oz. WATERPROOF
COVER
• 10 Cells with Woven Seams
The best since 1989
• Approximately 130 Pounds
Why Buy Anything Else?
• Stainless Steel Dump Waterers
/bealersV
\wanted^