118-UiKMtw Fanning, Saturday, October 15, 1994
D 1
Binkley &
Hurst Bros., Inc.
Has A Culti-
Mulcher With
Quality Features
Weight Transfer is needed on some fields Bearings on torsion-mounted hangers and
for best mulching results. Unique Farmhand roller tool bars combine with split roller axles
system allows weight to be distributed to Isolate shock loads. Up to 12 triple-lip
between the front and rear rollers and the sealed, self-aligning ball bearings are used
draw bar as needed. on the main frame of each machine.
See Binkley & Hurst Bros. For Quality New Rhino
Equipment To Do Your Job Right!
If It’s Snow Removal Or Heavy Duty Excavating, You
Need A Rhino Blade From Binkley & Hurst Bros. Now!
A support stand is standard on the 600 Blade to provide safer
storage and unit hook-up The moldboard and replaceable cut
ting edge form a constant curvature to cut and roll the material
being worked more efficiently Optional equipment includes
quick tach end plates, skid shoes, and CAT It quick coupler
bushings
96” Cut; 120 HP Center Gearbox; 90 HP Outboard
Gearboxes; Pan Blade Carriers; Updraft Blades; Cat
4 Driveline; Slip Clutch Protection; Lift or Pull-
Type; 540 or 1000 RPM; Replaceable Skid Shoes;
Rated for 2” Diameter Material; Safety Deflectors
Standard.
wfv vivivimmi 133 Rothsville Stdtion Rd«
BINKLEY HURST Lltltt, PA 17543 HH
Ptl BROS INC < 717) « 2<M7( ‘ s
■ *l v - 1-800-4*7-2978
For Fall Seeding See Binkley & Hurst Bros. Now For A New
jlti-Muicher In Stock!
The 800 Bladf features mainframe swing, moldboard pivot, and
moldboard tilt to fit a wide range of applications The blade
can be offset a maximum of 30" from the center line of the trac
tor for working outside the tractor tire The moldboard can be
pivoted a full 360 degrees for backfilling or working in hard-to
reach areas
Rhino Batwing Cutter
Witl
Gea
Box*
IS’ Cut; 540 or 1000 RPM, Cal. 5 Main Driveline; Cat 4 or 5 Wing
Drivelines; Pan Blade Carriers; 6" Blade Overlap; Mechanical Level-
Lift Axle; 10-Gauge Deck; l/4”xlO-l/2” Side Skins; Full Swivel
Clevis Hitch; Replaceable Skid Shoes; Wing Operation 90” Up and
22” Down; Rated for 2” Diameter Material Fully-Shielded Drive
lines; Safety Deflectors Standard
Complete Seedbed Preparation in One Pass
Here Is how FennliandMulchenpieperepeifed seedbeds In e single
psss. (I) Surface clods sre crushed into smsS partldn by Ihe Irani
rollers P) Burled clods are then brought lo Ihe surface by two rows ol
looped “Clines or Owlish vtbrsltng lines (3) Ths rsnr »«t of roSers
crumbles these dodr, dime Ihe seedbed, presses out the sir poclwls
end leaves s line seedbed for planting.
Mulching Makes You Money
Mulching yqur soil gives you better yields in two ways. Secondly, the small roots of sprouting seeds need a
First, loosely packed seedbeds with many clods allow ready supply of soil nutrients. Feeder root systems of
moisture to evaporate quickly through the air pockets, small plants in poorly prepared seedbeds cannot
Lost moisture reduces the speed of germination and break through the clods and reach but for
gives your crops a less efficient start. Mulching nourishment. Mulched soil allows the feeder roots to
creates a finer, clod-free seedbed with few air reach out in all directions. Thus, nourishment flows
pockets and gives your crop a uniform start through the roots to build strong, fast-growing plants
throughout the field. Moisture rises at Just the right that give you better yields,
rate from the water table below to the seedbed.
We Have A 13’10” Working Width, Model In Stock
JDKJg‘“®ST 'SS - «■
V — BROS. INC. X-800-487-2978 S^^lan.
STOP IN NOW!
ity
Rhino Cutter In Stock For You Now!
Performance and Durability Updraft Blades; Cat. 4
for Larger Acreages! 120” Driveline with Slip Clutch
Cut; 120 HP Center Gearbox; Protection; 540 Lift or
100 HP Outboard Gearboxes; Pull-Type; 10-Gauge Deck; l/4”xl0”
Pan Blade Carriers; Side Skirts; Replaceable Skid Shoes;
Rated for 2” Diameter Material; Safety
Deflectors Standard.
RHINO REAR
BLADES
With Hydraulics For Tractors Rated From
75-150 OBHP. Available w/7’, B’, 9’ & 10’
Moldboards.
Also Smaller Heavy
Built Units In Stock
McMank
Rotary
Cutters
Baar
BMn
Flail
Mowara
Thraa-Polnl Hitch
Boom Mowara
Finishing
Mawara
Paatura
Raoova?c~
PoatHala
Olggm
Rotary
Shraddars
Rataiy
A Tough and Economical Cutter!
L«ndKap« 72” Cut; 540 RPM; Cat 4 Shielded Driveline; Shear Bolt or
B- “* Slip Clutch Protection; 60 HP Gearbox; Pan Blade Carrier;
Updraft Blades; CAT I Three-Point Hitch; 10-Gauge Deck;
10-Ga. x 8” Side Skirts; Rated for 1” Diameter Material;
nnMn« Safety Deflectors Standard.
Guam
Rotary
TWora
5 -6’ and 7' Models In Stock
• Rhino Model LR 6’
7’-8’ 3 Pt. Blades
R 950 w/B’-9* Blade
SE6