MOLINE, Dl. John Deere
has announced its new 510 disk
ripper that sizes residue, deep tills
to 15 inches, and leaves a level
soil profile all in one pass.
Available in 12-foot 6-inch and
17-foot 6-inch working widths,
the 510 disk ripper features front
tandem disk gangs set at a 20-de
gree angle followed by five or
seven spring-reset standards,
depending on working width.
Rear tandem disk gangs, adjust
able to either an 18- or a 16-degree
angle for heavy or light soils and
residues, respectively, complete
the design.
The disk-ripper-disk arrange
ment provides several perfor
mance benefits. The front gapgs
size residue, kill weeds, and mix
organic matter into the soil. The
standards shatter hardpan and
open the soil for aeration and bet
ter water infiltration. The rear
gangs continue residue sizing,
weed killing, and mixing organic
matter into the soil, plus they level
the soil profile to eliminate the
need for a leveling pass prior to
chemical incorporation in the
spring. The 510 disk ripper does
not need a separate leveling
See Your
White-New Idea
Dealer Listed Below.
Columbus
Reed Brothers Equip.
Gettysburg
Yingling’s Imp. Inc.
New Oxford
Thomas E. Sibert Fann Equip.
Bechtelsville
Miller Equip. Co.
Bloomsburg
William F. Welliver
Carlisle
Carlisle Farm Service
Manheim
G & D Repair
Ono
Shuey Sales & Service
Easton
Fancy Furrow Farm Ag Equip.
Klingerstown
Stanleys Farm Service
Honesdate
Marshall Machinery
Airville
Farmers Equip. & Supply Co. Inc.
Oakland Mitts
Peoples Sales & Service Inc.
Somerset
Lincoln Supply & Equip. Co.
Middlebury Center
Houghtaling’s Garage
Ripper Designed
attachment.
The ability to properly position
the ripper standards relative to the
hardpan optimizes productivity,
fuel efficiency, and the wear-life
of ground engaging components.
The 510 disk ripper’s new inter
mediate standard features a three
position adjustment that provides
the flexibility to match ripping
depth to field conditions while
maintaining desired disk gang
depth. For example, with the disk
gangs set to run six inches deep,
the standard’s underfiame clear
ance settings of 34-1/2, 36, and
37-1/2 inches position the stan
dard point 12, 13-1/2, and 15
inches deep, respectively.
The standard has a trip height of
13 inches and is shearbolt
protected beyond 13 inches. The
standard’s parabolic shape and
2,300-pound trip force enable it to
hold depth better than other stan
dards with higher trip forces.
The 1-1/4 x 3-inch standards
are mounted on 30-inch spacings
for optimum soil disturbance
between die standards in all soil
types and conditions. -The stan
dards are equipped with
2-1/4-inch points. Optional 7-inch
Bury a tkfa restm!&s**■■
Inc.
7 Wide assort of
c hisc>po' nts&sW P
✓ Meets strict quality
requirements
Oral&t
The new White 445
Chisel Plow makes complying
with residue guidelines and
requirements easy. Options
like rippled coulters and chisel
points set at IS" spacing leave
lots of residue. Concave
coulters and twisted shovels
set at 12" spacing
leave less residue.
And these are just a
few of the combina
tions available.
Our deep-till
shank option rips
For One-Pass Deep Tillage
ripper sweeps extend the shatter
ing action between the standards
and give more complete weed kill.
The 24-inch-diameter disk
blades are mounted 11 inches
apart. This spacing reduces the
potential for plugging, yet sizes
residue to flow through
secondary-tillage tools. Heavy
duty combination scrapers pro
vide non-stop operation or
dry conditions. A one-blade taper
on the front and rear gangs and
integral furrow filler on the rear
gangs help ensure a level soil pro
file across the field.
The disk gangs operate to a
maximum depth of 6 inches and
feature C-spring mounting that
helps maintain a consistent depth,
yet provides flexibility for
protection.
Single-point depth control
makes setting operating depth fast
and easy. The level-lift hitch
keeps the frame level at all operat
ing depths and in transport.
The backbone of the 510 disk
ripper features 6x6x3/8-inch steel
tubing, for strength and durability
to,handle the demands of deep
tillage applications. On the larger,
7-standard machine, welded.
hardpan by tilling 4" to 6" deeper
than chisel shanks. This reduces
compaction
problems.
And our
leveling
bar
option
provides 9
smoother surface for your next pass
With nine models, there's a
model with the options to match
your residue management plans.
White
BY WHITE-NEW IDEA
*
The John Deere 510 Disk Ripper sizes residue, deep tills
to 15-inches, and leaves a level soil profile all in one
pass. The 510’s disk-rlpper-dlsk design features five
spring-reset ripper standards on the 12-foot 6-inch model,
seven on the 17-foot 6-Inch model.
4x6x5/16-inch side members also
contribute to frame strength and
rigidity. The 12-foot 6-inch model
weighs 7,500 pounds and has a
transport width of 14 feet 9 inches.
The 17-foot 6-inch model weighs
10,000 pounds and has a 20-foot
transport width.
Power requirements range from
/d.
i'
■v 1
White Row Crop Culm aloi s are
designed fin high speed
Lancaster Farming, Saturday, October 23, 1993-C9
* (
SADDLE
DPI
TO BETTER EQUIPMENT
Mml It to Lmmtmatmr tamiaf'i
CtouMtof
USED
GENERATORS
Onan Model SCCK - 3 P/ID
115/230 AC Volts
Skid Mounted, Reconditioned
5995
Winco Model 207K54PC - 1/A
115 Volts
2700 Watts, Good Condition
$250
——— SALES AND SERVICE
PBQUEA BATTERIES
1038 N. Ronki Rd, Ronki, PA 17572
717-687-0880
HIGH PRESSURE WASHERS
HIGH-TENSILE FENCING
WELPING SUPPLIES
KENDALL OILS & LUBRICANTS
A Kendall
i]
LUBRICANTS
stop.
2388 Old Leacock Rd.,
Gordonvilie, PA 17529
717-768-3853 ~UKS*m§~
185 to 275 horsepower for the
smaller model and 260 to 385
horsepower for the larger one,
depending on working depth and
soil conditions.
The factory is scheduled to
begin shipments of the 510 disk
ripper in July 1994.