EXTRA CAPACITY PLUS
FIVE-YEAR CUTTERHEAD
PROTECTION
FLIP-UP FEED ROLLS
QUICK-ADJUST SHEARBAR
J3S»>
V
You can if they’re New Holland knives. Every time New Holland updates or
improves its cutterheads and knives, it puts the prototypes through these
severe tests for durability, wear and dependability.
TEST I Must pulverize a 2"x2"x5-foot long solid oak plank. To pass this test,
no damage is allowed.
TEST II Must chew up and spit out a cold rolled steel bar, five feet long and
%" in diameter, stapled to a 1 "x 4" pine stud. Steel bar will be chipped into
pieces about Vz" long. Knife edge damage is expected, but knives must be
reusable after vigorous sharpening.
TEST 111 Must chop up a 5-foot-long gathering chain stapled to a 1 "x 4" pine
stud. Severe knife damage is expected. Body of each knife, however, must
remain stable. Knives might be resharpenable. Test will end when or if
shearbolt fails, or when entire gathering chain is chopped up, whichever
happens first.
* FINANCING IS AVAILABLE THROUGH FORD MOTOR CREDIT C
CHECK THESE PERFORMANCE FEATURES!
CAN YOU
TRUST
YOUR KNIVES
IN THESE
TOUGH TESTS?
• TWO SPEED BLOWER
• TUNGSTEN EDGE KNIVES
Come on in and
trade for performance.
When it comes to harvesting, you can’t beat the
heavy-duty performance that’s built into the New
Holland Model 790 forage harvester. Performance
starts at the cutterhead. The 19 11/16-inch wide,
12-knife cutterhead delivers a fine uniform chop
that’s just right for most silage feeding operations.
And an electric clutch gives instant response and
positive control on the reversing gearbox. The
Model 790 is available with either a 540 rpm or 1000
rpm PTO drive.
Stop in today and trade for the performance leader
in harvesters - the 790 from Ford New Holland.
* FREE FINANCE AVAILABLE
ON ALL NEW FORAGE
PRODUCTS TO JUNE 1, 1989!
- OR -
♦ LOW A.P.R. FINANCING:
0.0%, 12 MONTHS
5.9%, 24 MONTHS
7.9%, 36 MONTHS
8.9%, 48 MONTHS
9.9%, 60 MONTHS
- OR -
DIVIDENDS FOR CASH
PURCHASES
Lancaster Farming, Saturday, September 10, 1988-B1
EpEEI
]
17