mm
Mm KRAUSE TILLAGE
INNOVATORS
INVENTED THE
ROCKFLEX DISC
TO BRING PLEASURE
TO FARMERS
ALL KRAUSE DISCS
SOLDBYHOOBERS
HAVE THE 8 FEATURES
SHOWN AT RIGHT
SO THE FARMER
ENJOYS THE 6
PLEASURES SHOWN
BELOW
1.. Rugged, dependable
performance.
2.. Excellent penetration in tough
conditions.
3.. .Level job every time.
4.. Higher resale value when it’s
time to trade or sell.
5.. .More timely planting.
6.. More time with the wife.
TRY THE EAST’S MOST POPULAR MEDIUM DUTY ROCKFLEX DISKS
MODEL 2242 A
• 12’3” Cutting Width
• 22” 6 Gauge Blades
• 110 Lbs. Per Blade
C.B. HOOBER & SON, INC.
Intercourse, PA
(717) 768-8231
YOU CAN’T GET BETTER
PRICE OF A KRAUSE
If You Own A Used 2200 Or 1580
Rockflex Disc Harrow, Ifs Time
To Trade... Call For Trade Price
IHMHICD
HHUntlf
m TWO LOCATIONS
All New And Used Products Backed By Hoober Parts And Service
■
X. ~*f
ja m
FRAMES
Engineered of super
strength steel tubing
with cross braces and
gussets at major stress
points.
3. WHEEL HUBS
Krause Made - Precision
machined and regreasable
Every hub passes rigid in
spection to assure proper
vQPQPF tolerances.
4. TIE RODS AND SPOOLS
Alloy steel tie rods are IV in diameter on heavy duty
units (1 ”on medium duty) - (30% to 70% stronger
than many other brands.) There’s a nut on both ends
for easy servicing.
Krause spools are ductile iron, and weigh 20-to 30-lbs
each.
VALUE THAN
*>■ t i'/
- %v 'f>
■HMRSiKIitTV
Conserva
HEADO
1. “SUPERSEAL”
BEARINGS
Engineered to assure
positive greasing
directly into the
. cartridge. The triple
| hp seals keep grease
I in, dirt and moisture
/ out.
THE
5. OVERLAPPING FRONT
DISC GANGS
A unique Krause design
for smoother, more |^J
uniform field finish. It
eliminates the center rj
strip of untilled ground
left by conventional
tandem discs.
7. WING HINGES
Krause uses big W
diameter bolts on heavy
duty units (IV on medium
duty) with over 10” of wear
surface area.
8. ROCKER SHAFTS
A full 6” in diameter
w 'th big steel tube wheel
7 arms for maximum
»f carrying capacity.
V _ Compare ours to other
makes!
• 16’8” Cutting Width
• 22” 6 Gauge Blades
• 140 Lbs. Per Blade
• 11’6” Folded Width
HOOBER EQUIPMENT, INC.
Middletown, DE
(302) 378-9555
6. “ROCKFLEX” BEARING
ARMS
Krause invented the “Rock-Flex”
arm m 1965. This unique C-shaped
arm flexes over obstacles. It helps
protect disc blades and spools from
breakage. “Super Seal” bearing is
completely encased in rubber to
absorb shock.
MODEL 1577
1988-C:
13,
123
1
1
•j