ALL KRAUSE DISCS
SOLD BY HOOBERS
HAVE THE 8 FEATURES
SHOWN AT RIGHT A
SO THE FARMER
ENJOYS THE 6
PLEASURES SHOWN
BELOW
I... Rugged, dependable
performance.
2... Excellent penetration in tough
conditions.
3... Level job every time.
4... Higher resale value when it’s
time to trade or sell.
5...M0re timely planting.
6...M0re time with the wife.
SEP PLOWS & CHISEL PLOWS
IH 540 Plow, 4 Bottom, 16”, Semi-Mount, Shifting
Hitch (T 1851)
IH 311 Plow, 3 Bottom, 14”, 2 Pt. Hitch (T 9872)
MFB26F-16” Plow (T 1025)
JD 2500 6 Bottom 18” Hyd. Reset (T 2198)
IH 5500 3 Pt. Chisel, 11 Shank (T 2483)
JD SF-16”, Auto. Reset, Semi-Mount (T 2526)
Athens 131 Tandem, 14’, 9V Spacing, Cylinder,
Blades Good, Excellent Condition (T 1556)
Deere 111 Tandem, 10’ Excellent Finishing Disc (T 1602)
IH 470 Folding Tandem, 18’, Manual Fold,
Cylinder, 2-Bar Midwest Mulcher (T 1699)
IH 501 Cutting Tandem, 13’, 10 V Spacing, This Is A
Heavy-Duty Disc (T 1824)
Deere 330 Folding Tandem, 20’, Cutting, An Inexpen
sive Heavy-Duty Disc (T 1950)
Miller Folding Offset, 20’ Single-Wing, Spacing - 9 V
Front & lO 1 Rear, Dual Wheels, Heavy-Duty (T 2044)
Bush Hog Tandem, 10’ Heavy-Duty (T 9109)
Sunflower, GR-29 Flex-Wing Tandem, Heavy-Duty,
Double-Offset, 9” Spacing (T 9415)
Bush Hog 12’ Tandem, 9” Spacing, Good Inexpensive
Disc (T 9847)
MF 5212’ Disc, 16” Front, 17" Rear (T 2365)
IH 490,24’ Tandem, 9” Spacing, 18V Front & 19” Rear
Blades (T 2469)
Krause 2416 Cuttmg Disc, 26’ Tandem, 19 V Front &
20” Rear Blades (T 2380)
Oliver 16’ Disc, Manual Fold Wings - Buy for Center
Section @ 12’ CHEAP (T 2337)
Athens 8310’ Disc, Size 19” Fit., 21” RR, Cyl. & Hoses
(T 1604)
Deere 310 Disc, 12’, 11” Spacing, Dual Tires, 22V
Front, 22” Rear Baldes (T 2352)
Bush Hog 21’ Disc, Tandem (T 2393)
IH 470,18’ Tandem, Flex-Wing, 18” Front & 20” Rear
Blades (T 2516)
Oliver 29210’ Disc (T 2590)
CALL US.;.
m SHIP PARTS DAILY
VtoUPS-PPSH-BUS-
Ammmm,ETC.
Ife KRAUSE TILLAGE INNOVATORS
INVENTED THE ROCKFLEX DISC
TO BRING PLEASURE TO FARMERS
>1
k \
2. FRAMES i * l^RJj
Engineered of super Bvjjj
strength steel tubing
with cross braces and
A gussets at major stress
points.
3. WHEEL HUBS
Krause Made-Precision
machined and regreasable.
Every hub passes rigid in
spection to assure proper
tolerances.
4. TIE RODS AND SPOOLS
Alloy steel tie rods are 1%” in diameter on heavy duty
units (W on medium duty) - (30% to 70% stronger
than many other brands.) There’s a nut on both ends
for easy servicing.
Krause spools are ductile iron, and weigh 20-to 30-lbs.
each.
• Midwest Mulchers (T 1516)
• Deere, Roller Harrow, 12’, Excellent Condition (T 1712)
• Krause 4133 Field Cultivator (T 2290)
• Brillion 23’ Harrow, 56 Tooth, Flex-Wing (T 2534)
• Krause 3113 Landsman, 19 Shank, 16 V Blades,
Walking Tandem (T 2517)
USED CULTIPACKERS
• Shepherd, 9’ Cultipacker, Cheap Finishing For The
Small Farm (T 9521)
USED COMBINES
• IH 815 Hydro Combine, Diesel (U 1844)
• John Deere 6620 Sidehill, Diesel, Hydro, 1200 Hrs.
(U 2121)
• JD 6620 Sidehill, 28Lx26 Tires, Hydro, Diesel, Grain
Loss Monitor, 2446 Hours, 1983 (U 2255)
• Used Bean Harvester, Clusolm-Ryder, IH 504 Tractor
• IH 1480 Hydro, 1192 Hrs., 30.5Lx32 Tires, DJ Monitor
(U 2133)
• IH 1460 Hydro, 28Lx26 Tires, DJ Monitor (U 2252)
• IH 815 Diesel, Hydro, 23.1x26 Tires (U 1362)
• IH 715 Diesel, Gears, 2243 Hrs., 23.1x26 Tires (U 1849)
• IH 715 Diesel, Hydro, 1976,23.1x26 Tires, 1224 Hrs.,
A/C (U 2113)
• MF 510 Diesel, Gear, A/C, Gramsaver, 18.4x26 Tires
(U 1995)
• IH 715 D Hydro, 18.4x26, Monitor (U 7818)
• IH 715 Diesel, Hydro, 1976,1100 Hrs., 23.1x26 Tires
(U 1961)
• John Deere 4400 Diesel, 18.4x26 A/C, Straw Chopper
(U 9806)
• Gleaner G, Gear, Cab, Diesel w/4 Row Cornhead, 13’
Platform (U 1369)
• MF 510 Diesel, Gear, 18.4x26 Tires, AC (U 1992)
• JD 7700 w/Straw Chopper, 24.5x32 Tires, Gear
w/Variable Speed (U 1361)
• IH 203 Combine, Gas, Gear, Cab, 2 Row Cornhead
(U 1205)
&k:hi
Authorized
UPS Station
1. “SUPERSEAL”
BEARINGS
Engineered to assure
positive greasing
directly into the
k cartridge. The triple
| lip seals keep grease
I in, dirt and moisture
' out.
USED TILLAGE
C.B. HOOBEE & SONS, INC.
Intercourse, PA
(717) 768-8231
5. OVERLAPPING
DISC GANGS
A unique Krause design
for smoother, more
uniform field finish. It
eliminates the center
strip of untilled ground
left by conventional
tandem discs.
7. WING HINGES
Krause uses big 1%”
diameter bolts on heavy
duty units (I*6” on medium
duty) with over 10” of wear
surface area.
8. ROCKER SHAFTS
JpUt A full 6” in diameter
¥ with big steel tube wheel
v' arms for maximum
- carrying capacity.
Compare ours to other
makes!
USEDSPRAYERS
• FMC 1-Way Head For 1229 Air-Blast Sprayer (V 1078)
• Meyer’s 3 Pt. Air Blast Sprayer (V 2624)
MISCELLANEOUS USED
• IH 540 Manure Spreader, 150 Bushel, New Bottom
& Sides, New Web, Repainted, If You’d Like A
New Spreader But Cannot Afford One - This Is
Your Spreader (V 9769)
• IH Row Crop Head, 2 Row, Fits 830 or 881 Forage
Harvester (U 9501)
• IH 56 Blower (U 2592)
• NHIOIO Auto. Bale Wagon (U 2620)
USED TRACTORS
• Versatile 160 4 WD, 100 HP Diesel Engine, Hydro
Transmission, Loader, 3 Point Hitch, PTO (W 1364)
• IH 3588 2+2, Rear Duals, TA, AC, 540-1000 PTO
(W 2244)
• IH 5488, ’82,1918 Hrs., AC, 4 Remotes, 12.8x38
Duals - 90% (W 2177)
• 1H5488 AWD, 347 Hrs., AC, 18.4x42 Rear, 16 9x28
Front Tires - 85%, 1000 PTO (W 2309)
• IH 1566 w/Cab, AC, 20.8x38 Duals, TA (W 2254)
• IH 1206 w/Cab, AC, TA, 23.1x34 Tires, 540-1000
PTO (W 1670)
• IH 886 w/Gear, Cab, AC, TA, 18.4x34 Tires - 85%,
540-1000 PTO (W 2391)
• IH 4386 All Wheel Drive, Gear, AC, 18.4x38 Tires,
1990 Hrs. (W 2468)
• 1H1466, Gear, TA, Cab, 1000 PTO, 23.1x34 Tires,
1912 Hrs (W 2518)
• IH F2OO, Gas, Tricycle Front (W 2521)
• IH 560 Diesel, Gear, TA, 1750 Hrs., 540 PTO (W 2602)
• Case 1845 Uniloader, Hydro, HOPS (W 2572)
• IH 856, Cab, AC, 540-1000 PTO (W 2289)
• IH 3588 2 + 2,18.4x38 Tires, TA 540-1000 PTO (W 2481)
• IH 1066,20.8x38 Tires, 540-1000 PTO, TA (W 1715)
• Farmall A, 540 PTO, 11.2x24 Tires (W 2640)
• IH 230 w/7’ Sickle Bar Mower, Gas, 540 PTO (W 2653)
• Ford 601 w/6’ Snow Blade, Gas, 540 PTO, 3 Pt. Hitch
(W 2669)
6. “ROCKFLEX” BEARING
ARMS
Krause invented the “Rock-Flex”
arm in 1965. This unique C-shaped
arm flexes over obstacles. It helps
protect disc blades and spools from
breakage. “Super Seal” bearing is
completely encased in rubber to
absorb shock.