s --v s y? \j
•/>'< N '< S
>■ s , \ jN
' . *X' ..•■<* s
▼ SEmS^IRBI,
HEADQUAR
ALL KRAUSE DISCS
SOLDBYHOOBERS
HAVE THE 8 FEATURES
SHOWN AT RIGHT A
SO THE FARMER
ENJOYS THE 6
PLEASURES SHOWN
BELOW
...Rugged, dependable
performance.
...Excellent penetration in tough
conditions.
...Level job every time.
...Higher resale value when it’s
time to trade or sell.
...More timely planting.
...More time with the wife.
SPECIAL SALE On Our Most Popular MEDIUM DUTY DISCS
MODEL 2242 A
• 12’3” Cutting Width NEVER BEEN LOWER
• 22” 6 Gauge Blades
• 110 Lbs. Per Blade
C.B. HOOBER & SONS, INC.
Intercourse, PA
(717) 768-8231
' V
'k v V
krtlt
' , ' 'v*
•V* V* •
"*&J£
i(302) 378-9555
m TWO LOCATIONS
All New And Used Products Backed By Hoober Parts And Service
FRAMES
Engineered of super
strength steel tubing
3. WHEEL HUBS
Krause Made - Precision
machined and regreasable.
Every hub passes rigid in
spection to assure proper
tolerances.
4. TIE RODS AND SPOOLS
Alloy steel tie rods are IV in diameter on heavy duty
units (IV on medium duty) - (30% to 70% stronger
than many other brands.) There’s a nut on both ends
for easy servicing.
Krause spools are ductile iron, and weigh 20-to 30-lbs.
each.
PRICES ON THESE
MODELS HAVE
1 KRAUSE TILLAGE
INNOVATORS
INVENTED THE
ROCKFLEX DISC
TO BRING PLEASURE
TO FARMERS
. “SUPERSEAL”
BEARINGS
Engineered to assure
positive greasing
directly into the
cartridge. The triple
lip seals keep grease
in, dirt and moisture
out.
with cross braces and
gussets at major stress
points.
5. OVERLAPPING FRONT
DISC GANGS
A unique Krause design
for smoother, more
uniform field finish. It
eliminates the center r j
strip of untilled ground
left by conventional
tandem discs.
7. WING HINGES
Krause uses big 1%”
diameter bolts on heavy
duty units (1 %” on medium
duty) with over 10” of wear
surface
8. ROCKER SHAFTS
A full 6” in diameter
big steel tube wheel
f arms for maximum
\f carrying capacity.
'«, Compare ours to other
makes!
• 16’8” Gutting Width
• 22”6$migeBlades
• 140 Lbs. Per Blade
• 11*6” Folded Width
6. “ROCKFLEX” BEARING
ARMS
Krause invented the “Rock-Flex”
arm in 1965. This unique C-shaped
arm flexes over obstacles. It helps
protect disc blades and spools from
breakage. “Super Seal” bearing is
completely encased in rubber to
absorb shock.
MODEL 1577