Lightweight header (exclusive)
because rolls are in the mainframe,
not the header. Better flotation
results in better stubble, less
damage to guards and knife
sections
Twin tick!*, dual drive, counter
stroking action reduces vibration
and maintenance.
HOLLAIND
PROUDLY INTRODUCES THE
MOWER-CONDITIONER
Roll eel ' h—dy (exclusive) with
converging reel tines sweeps crop
directly into rolls without an auger.
Uses less power. Easier to main
tain. Stronger tine bars than previ
ous models
Overall Width —Transport Position —165 in. (4191 mm)
Field Position —236 in. (5994 mm)
Overall Length —Transport Position —258 in. (6553 mm)
Field Position — 200 in. (5080 mm)
Height —Transport Position —80Vi in. (2045 mm)
Operating Position —74Vi in. (1892 mm)
Weight (without options)—44Bo lb. (2032 kg)
Hitch Type —Replaceable ball joint used with
tractor drawbar extension.
Drive —PTO driven hydrostatic system
Hydrostatic System
a. Reservoir Capacity—2o gal. (75.7 L)
Tractor Requirement —6o hp (45 kW) or greater with standard
ASAE hitch and PTO locations
(540 RPM PTO). Two remote hydraulic
systems required, capable of pumping
fluid at 1500 psi (10342 kPa or 103.42
i bar).
•Sickle Drive
a. Speed—Bso cycles/minute
b. Stroke —3 in. (76 mm)
Pushber— Fabncated Steel, adjustable height
Conditioner
a. Roll length—llo in. (2794 mm)
b. Roll diameter —10% in. (264 mm)
c. Roll type—molded rubber with intermeshing
chevron design lugs
d. Drives—gear driven, U-joint drive to upper
roll, straight shaft to lower roll
MODEL 499
PIVOT TONGUE
ir. Interim
(exclusive) are over 9-feel
proper conditioning, swath or wfiW*,. High capacity hydrostatic pump
row capability. Rolls are gear dnvert (JeffversWpercertf greateV~(rahsfer
for longer life, lower maintenance. 0 f tractor power than previous mod
els for greater machine capacity.
SPECIFICATIONS
Tonpua lock (exclusive) holds
unit in straight ahead position, pre
vents accidental swinging during
transport.
Hydraulic guard angle control
(special option) changes cutting
angle automatically from the tractor
cab as field conditions require.
Material Discharge
Swath Width 100 inches (2,540 mm)
Windrow Width 38 inches (965 mm)
Adjustments—Adjustable swath gate controlled by 11
position handle to give swath windrow, or
intermediate widths.
Ground Clearance
Guard Points —19.5 in. (495 mm)
Reel
a. Type—Rolareel'"
b. Tine tip speed
c. Diameter (Maximum)
Cutterbar
a. Width—l 2 ft. 3 in. (3,734 mm)
b. Guard angle—adjustable 4°, 7° or 10° —(4 to 10
with optional hydraulic guard angle
adjustment kit)
c. Guards —Twin forged steel, double heat treated
(PN 219191)
d. Cutting height—adjustable I V* to 6V4 in.
(32 to 159 mm)
e. Knives —two opposing knife assemblies with
underserrated sections (STD guards)
Operating speed— o to 8 mph (0 to 12.9 km/hr)
Transport speed —2s mph (40 km/hr) max.
Wheels
Tire size—llL x 14 four ply tubeless agricultural
implement tire with heavy undertread.
Hydraulic cylinders
STD Equipment—Swing Cylinder
STD Equipment—Lift Cylinders
Adjustable swath gate converts
from windrow to swath in seconds,
without tools.
Uncaster Farming, Saturday, April 7,1984—F1S
Header lift system (exclusive) lifts
both header and frame to clear
windrows and obstacles
Pivot-tongue frame offers greater
maneuverability operates on
either side of tractor so you can
mow back and forth on same side
of field.
4.8 to 7.9 mph (7.7 to 12'. 7 km/hr)
43Vi in. (1105 mm)